|
Adjustability = Our tables all use the same leg and arm systems.
The legs adjust in height on both ends a full 14 ins. In 1 ins. increments.
Simply lift the table or chair and the legs lock into place. To release the
legs and lower the table or chair, you lift slightly and pinch the two lock
tabs at the bottom of the leg. No pins or other devices to mess with. This
gives seating heights from 20 to 34 ins. The leg system lets you angle the
table as well as adjust the height because each end adjust separately of the
other. The arms adjust on three axis letting you position your clients in
about any imaginable position with comfort. This much adjustability means
comfort for you, the tattoo artist. Less back and neck strain for those long
days at work. More comfort, less strain makes your work go faster. Faster
work means you make more money. Because our tables and chairs can be adjusted
in so many ways the artist is best to experiment with the table or chair to
find what setup works best for how they like to work on different body part.
If you have a problem finding a setup that works well for what you are trying
to do just e-mail or call us and we will give you suggestions based on our
experience. |
|
Adjustability |
|
The backrest of the
Mini can be installed many ways or removed completely. You can use
the long or short side of the arm bars. The backrest and the arm holders have
a cam action high and low adjustment. With a little trial and error you will
find how to adjust it to suit you. The
flat pad and the round Pads can be installed any where on the arm bars. All models use the same arms and legs. |
|
j |
